Markanda Nanoscience (OPC) Private Limited

Product Name : Aluminum Carbonitride Micro Powder

Aluminum carbonitride (Al5C3N and Al6C3N2) materials were prepared by combustion reaction. The result showed that the main phases of the product were Al5C3N, Al6C3N2, and AlN. The lathed Al5C3N grains and the lamellar Al6C3N2 grains had a same length of approximately 10 μm. Additionally, some hexagonal AlN grains developed well. The combustion temperature reached 2256 K. Aluminum carbide nitride materials has been firstly prepared by combustion synthesis from Al powder and a carbon-nitrogen precursor. The lathed Al5C3N and lamellar Al6C3N2 grains were prepared. The aluminum carbonitride grains had a same length of approximately 10 μm.

Related Information :-

Product Name :           Aluminum Carbonitride Micro Powder        

Appearance                 Gray

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula： AlCN

Molar mass：      52.999

Density：          3.2 g/cm3

Melting point：     2200 °C

Applications :

Aluminum Nitride Powder (AlN) Application:

Manufacturing integrated circuit board, electronic devices, optical devices, radiator, high temperature crucible; Fabrication of metal matrix and polymer matrix composites, especially in the heat seal adhesives and electronic packaging materials have wide application; High thermally conductive ceramics; Composite ceramics, e.g. evaporation boats; Heat sinks; Electrically insulating packages for electronics; Crucibles for metals and salt melts;

Storage Conditions:

Airtight sealed, Avoid light and keep dry at Room Temperature.  

Additional Information:

• Packaging Details: 4-5 days by dtdc

Product Name : Aluminum Oxynitride Micro Powder

Aluminum Oxynitride is a transparent optical ceramic powder with typical grain size of 150-250 microns and surface areas from 0.9 - 7.5 m2/g range. Aluminum oxynitride has a cubic spinel crystal structure and is four times harder than silica glass and three times harder than steel' . It is also available in ultra high purity and high purity and coated and dispersed forms. High surface area aluminum oxynitride nano layers can also be achieved using thin film by sputtering targets and evaporation technology using pellets, rod and foil. Nanopowders are analyzed for chemical composition by ICP, particle size distribution (PSD) by laser diffraction, and for Specific Surface Area (SSA) by BET multi-point correlation techniques. Research into applications for Aluminum Oxynitride includes use in aerospace to take advantage of its transparent properties due to and firmness, thermal conductivity, controllable thermal expansion

Cas No:                       12633-97-5    

Appearance                 White

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  Al3NO3

Molar mass：             N/A

Density：                   3.696-3.691 g/cm3

Melting point：          ~2150 °C

Boiling Point  :           N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 3-4 days after payment

Product Name :  Aluminum Boride Micro powder

Cas No:           12041-50-8

Appearance     Powder

APS                 1-5µm

Purity              ≥99%

Chemical Formula       B2Al

Molar Mass                 48.604 g/mol

Density                        3.19 g/cm3

Soluble In H2O           N/A

Description :-

Aluminum Boride (Aluminum Diboride) is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Borides are hard, high-melting materials with metal-like conductivity. They are stable to nonoxidizing acids but break down in strong oxidizing agents and strong alkalis. Borides are used in semiconductors, superconductors, diamagnetic, paramagnetic, ferromagnetic, anti-ferromagnetic, turbine blades, and rocket nozzles. Borides have recently been discovered to be superconductive and ultra-incompressible.Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 4-5 days

Product Name :  Aluminum Chloride Micro powder

Cas No:           7446-70-0

Appearance     Powder

APS                 1-5µm

Purity              ≥99%

Chemical Formula       AlCl3

Molar Mass                 133.34

Density                        2.48 g/cm3

Soluble In H2O           N/A

Description :-

Aluminum Chloride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement. Please request a quote above for more information on lead time and pricing.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 4-5 days by dtdc

Product Name :  Copper-doped Titanium Aluminum Carbide

Cas No:                       N/A

Appearance                 Dark gray to black powder

APS                             1-5µm

Purity                          ≥99%

Chemical Formula       Cu:Ti3AlC2

Molar Mass                 258.15

Density                        3.8 g/cm3

Soluble In H2O           N/A

Description :-

Copper-doped Titanium Aluminum Carbide is a ternary layered MAX phase compound of the general type Mn+1AXn, where M is a transition metal, A is an element such as aluminum or silicon, and X is either carbon or nitrogen, with n=1, 2, or 3. MAX phase compunds are precursors for the production of MXenes, novel 2D materials notable for their properties that combine aspects of both metals and ceramics. MXene from the bulk three dimensional MAX phase compound involves exfoliation or etching to selectively remove the A layer, resulting in layers which can be separated by other ions (known as intercalation) which enhances their properties. Please request a quote above to receive pricing information based on your specifications.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 4-5 days

Product Name : Zirconium Hydride Micro Powder

Zirconium Hydride is generally immediately available in most volumes. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered. Hydride compounds are used often used as portable sources of hydrogen gas.

Cas No:                       7704-99-6      

Appearance                 Gray Powder

APS                             1-5 Micron (Can be Customized)

Purity                          ≥99%

Chemical formula：  ZrH2

Molar mass：             93.24

Density：                   5.56 g/cm3

Melting Point :           N/A

Boiling Point :                        N/A

Solubility in H2O:      N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 days

Product Name : Zirconium Carbonitride Micro powder

Zinc nitride (Zn3N2) is an inorganic compound of zinc and nitrogen, usually obtained as (blue)grey crystals. It is a semiconductor. In pure form, it has the anti-bixbyite structure. Zinc Nitride is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade

Cas No:                       N/A

Appearance                 Gray Powder

APS                             1-5 Micron  (Can be Customized)

Purity                          ≥99%

Chemical formula：  ZrC-ZrN

Molar mass：             N/A

Density：                   6.9-7.06 g/cm3

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Hafnium Carbonitride Max Phase Powder

Pack Size : 50 Gram, 100 Gram , 250 Gram, 500 Gram ,

Hafnium Carbonitride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade.Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement. MXene from the bulk three dimensional MAX phase compound involves exfoliation or etching to selectively remove the A layer, resulting in layers which can be separated by other ions (known as intercalation) which enhances their properties. Please request a quote above to receive pricing information based on your specifications.

Cas No:                       N/A    

Appearance                 Gray Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99.9%

Chemical formula：  HfCN

Molar Mass：            204.51

Melting Point:             >3890 °C

Boiling Point:             N/A

Density:                      N/A

Solubility in H2O:      N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 days

Product Name : Antimony Tin Oxide Nanopowder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

ATO can shield heat when it is used in hot mirror, building or glass curtain wall. ATO can be used in the glass of car, train and plane to protection against fog and frost.Due to the decline of the microwave, ATO can be used in computer room and radar shielding and protecting area where needs to shield electromagnetic wave.The product of Antimony Tin Oxide Nanopowder ATO has the excellent quality of electricity and optics. Due to its good conductivity, Antimony Tin Oxide Nanopowder can be widely used in the industry of coating, chemical fiber and polymeric membrane as anti-static material. Antimony Tin Oxide Nanopowder has more advantaged properties in dispersion, weather-ability, thermoplastic, wear resistance, and security than some other conductive materials such as graphite, surfactant, and metallic powder etc.

Related Products :

Indium Tin Oxide (ITO) Nanopowder / Nanoparticles (ITO, In2O3:SnO2=90:10, 99.99+%, 20-70nm)

Indium Tin Oxide (ITO) Nanopowder / Nanoparticles (ITO, In2O3:SnO2=95:5, 99.99+%, 20-70nm)

ITO Nanopowder / Nanoparticles Water Dispersion (ITO, In2O3:SnO2=90:10, 99.99+%, 20-70nm, 20wt%)

ITO Nanopowder / Nanoparticles Water Dispersion (ITO, In2O3:SnO2=95:5, 99.99%, 20-70nm, 20wt%)

ITO Nanopowder / Nanoparticles Ethanol Dispersion (ITO, In2O3:SnO2=90:10, 99.99+%, 20-70nm, 20wt%)

ITO Nanopowder / Nanoparticles Ethanol Dispersion (ITO, In2O3:SnO2=95:5, 99.99%, 20-70nm, 20wt%)

ITO Nanoparticles / Nanopowder (Indium Tin Oxide 90:10, 18nm, Blue Color)

ITO Nanopowder / Nanoparticles (Indium Tin Oxide 95:5, 18nm, Blue Color)

ITO Nanoparticles / Nanopowder Water Dispersion (Indium Tin Oxide 90:10, 18nm, 20wt%, Blue Color)

ITO Nanopowder / Indium Tin Oxide Nanoparticles Water Dispersion (ITO 95:5, 18nm, 20wt%, Blue Color)

ITO Nanoparticles / Nanopowder Ethanol Dispersion (Indium Tin Oxide 90:10, 18nm, 20wt%, Blue Color)

ITO Nanoparticles / Nanopowder Ethanol Dispersion (Indium Tin Oxide 95:5, 18nm, 20wt%, Blue Color)

Indium Oxide (In2O3) Nanopowder / Nanoparticles (In2O3, High Purity, 99.995%, 20-70 nm)

Indium Hydroxide In(OH)3 Nanopowder / Nanoparticles (In(OH)3, high purity, 99.99+%, 20-70 nm)

Antimony Tin Oxide Nanopowder / Nanoparticles (ATO, SnO2:Sb2O3=90:10, 30nm, high purity, 99.95+%)

AZO Nanoparticles / AZO Nanopowder Water Dispersion (AZO, 15nm, 20wt%)

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Cerium Oxide Nanopowder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

Buffer layer for superconductors; Catalysts and catalyst support; Coatings for infrared filters; Coloring agents for plastics; Electrolyte and/or electrode materials for solid oxide fuel cells; Heat resistant alloy coatings; Infrared absorbents; Oxidation resistant coatings; Oxygen pumps; Oxygen sensors; Polishing media for electronic devices, glasses, and bearing balls; Sintering additives; Ultraviolet absorbent (absorption at ~ 400 nm is the strongest for any oxide)

Related Products :

Cerium Oxide Nanopowder / Nanoparticles (CeO2, 99.97%, 100nm)

Cerium Oxide Nanopowder / Nanoparticles (CeO2, 99.97%, 50nm)

Cerium Oxide CeO2 Nanopowder / Nanoparticle (CeO2, 99.97%, 10-30nm)

Cerium Oxide CeO2 Nanopowder / Nanoparticle (CeO2, 99.99%, 10nm)

Cerium Oxide Nanoparticles / Nanopowder Water Dispersion (CeO2, 20wt%, 10 nm)

Cerium Oxide Nanoparticles / Nanopowder Ethanol Dispersion (CeO2, 20wt%, 10nm)

Cerium Oxide CeO2 Nanopowder / Nanoparticle Water Dispersion (CeO2, 20wt%, 30-50 nm)

Cerium Oxide CeO2 Nanopowder / Nanoparticle Water Dispersion (CeO2, 40wt%, 30-50 nm)

Cerium CeO2 Powder, 99.97+%, 5um

How to Disperse Nanoparticles? Nanoparticles Surfactant / Nanopowder Dispersant

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

Product Name :  Aluminum Silicon Alloy Micropowder

CAS: 11145-27-0

Chemical Formular: AlSi

Purity: >99%

Molecular Weight: 55.067 g/mol

Melting Point: 600-760 °C

Density: 2.7 g/cm3

Solubility in water: Insoluble

Exact Mass: 54.958 g/mol

Monoisotopic Mass: 54.958 g/mol

Description :-

It is a silvery-white, soft, non-magnetic and ductile metal in the boron group. By mass, aluminium makes up about 8% of the Earth’s crust; it is the third most abundant element after oxygen and silicon and the most abundant metal in the crust, though it is less common in the mantle below. Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.It is a hard and brittle crystalline solid with a blue-grey metallic lustre; and it is a tetravalent metalloid and semiconductor.It is a member of group 14 in the periodic table: carbon is above it; and germanium, tin, and lead are below it.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 4-5 days

Product Name :  Copper-Carbon Nanotube Fibers Composite Wires

Cu-CNT, Diameter: 10-30 µm, Coating Thickness: 1 µm, Electrical conductivity: 1×10^7 S/m

Copper-Carbon Nanotube Fibers Composite Wires

Cu-CNT, Diameter: 10-30 µm, Coating Thickness: 1 µm, Electrical conductivity: 1×107 S/m

Copper/carbon nanotube composites (Cu/CNT composites) is produced for the demand of lighter copper substitutes with superior electrical, thermal and mechanical performances. They are used in many industries and vehicles such as automobiles and aircrafts in order to enhance fuel efficiencies. In electronics, they offer better interconnection and thermal management than copper with higher current- and heat-stabilities to enable device miniaturization with increased functionality. This material is highly functional, efficient, and sustainable for the next-generation electrical and electronics systems.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Product Name :  Gold-Carbon Nanotube Fibers Composite Wires

Gold-Carbon Nanotube Fibers Composite Wires

Au-CNT, Diameter: 10-30 µm, Coating Thickness: 1 µm, Electrical conductivity: 1×107 S/m

Gold/carbon nanotube composites (Au/CNT composites) is produced for the demand of superior electrical, thermal and mechanical performances. They are used in many industries and vehicles in order to obtain better conductivity performances. In electronics, they offer better interconnection and thermal management than non-composite materials. This material is highly functional, efficient, and sustainable for the next-generation electrical and electronics systems.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Product Name : Lanthanum Nickel Alloy Micropowder

Lanthanum Nickel is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. soodchemicals offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies.

Cas No:                       12196-72-4    

Appearance                 Gray Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  LaNi5

Molar mass：             432.37

Density：                   7.950 g/cm3

Solubility in H2O:      Insoluble

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Manganese Borohydride Micro Powder

Manganese Borohydride is generally immediately available in most volumes. soodchemicals offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. High purity, submicron and nanopowder forms may be considered.

Cas No:                       N/A    

Appearance                 White Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  Mn(BH4)2

Molar mass：             84.62

Density：                   N/A

Solubility in H2O:      N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 days

Product Name : Tantalum Carbide Micro Powder

Pack Size : 50 Grams , 100 Grams , 500 Gram, 1000 Gram ,

Product Description

Tantalum carbide is mainly used in powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutters, tools, molds and wear-resistant and corrosion-resistant structural components additive,so to improve the toughness of alloy. Tantalum carbide is mainly used in powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutters, tools, molds and wear-resistant and corrosion-resistant structural components additive,so to improve the toughness of alloy

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at Room Temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 Days

Product Name : Tantalum Hafnium Carbide Micro Powder

Pack Size : 50 Grams , 100 Grams , 500 Gram, 1000 Gram ,

Product Description

Tantalum carbide is mainly used in powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutters, tools, molds and wear-resistant and corrosion-resistant structural components additive,so to improve the toughness of alloy. Tantalum carbide is mainly used in powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutters, tools, molds and wear-resistant and corrosion-resistant structural components additive,so to improve the toughness of alloy

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at Room Temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Production Capacity: 100 kg
• Delivery Time: 6-7 days

Product Name : CrALC MAX Phase Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description

The autonomous crack-healing capability of Cr2AlC MAX phase ceramic by surface oxidation at elevated temperatures has a huge potential for high temperature structural and protective coating applications. In this work we use time-lapse X-ray computed tomography (CT) to track the fine details of local crack filling phenomena in 3 dimensions (3D) with time. The maximum crack width that could be fully healed upon exposure to 1200 °C in air is 4.8 μm in 4 h and 10 μm after 12 h. Furthermore, during healing Cr7C3 phase is observed beneath the dense Al2O3 layer (average thickness of 1 μm on each crack surface) when the crack width exceeds 2 μm. The 3D image sequences indicated that the rate of healing is essentially independent of position along, or across, the crack faces. The crack healing kinetics of Cr2AlC at 1200 °C broadly follows a parabolic rate law with a rate constant of 4.6 × 10⁻⁴ μm² s⁻¹. The microstructure, composition and thickness of the oxide scale in the healed crack area are characterized via post mortem SEM-EDS measurements and confirm the formation of an initial dense alumina layer on top of which a more porous layer forms.

Related Product:

Cobalt doped Ti3ALC2 MAX                       

Copper doped Ti3ALC2 MAXene    

Cr2C MXene 

Cr2GaC MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Mn2GaC MAX Phase Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

We report on first principles prediction and subsequent synthesis of Mn2GaC, a new member of the inherently nanolaminated Mn+1AXn (MAX) phase family. This phase, the first to include Mn as the sole M element, was synthesized as a heteroepitaxial thin film. The material was theoretically predicted to display magnetic ordering with ferromagnetic (FM) and antiferromagnetic configurations degenerate in energy within the computational accuracy. Vibrating sample magnetometer measurements show FM ordering with a saturation moment of ms=0.29 μB per Mn atom and remanent moment of mr=0.15 μB per Mn atom for temperatures≤230 K.

Related Product:

Mn3AlC2 MAXene Powder  

Mo2C MXene Powder           

Mo2Ga2C MAXene Powder

Mo2GaC MAX Phase Powder          

Mo2Ti2AIC3 MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Nb2PC MAX Phase Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description

MAX phase carbides are a set of materials that have attracted the research and industrial interest due to their unique combination of metallic and ceramic properties. In recent experimental studies it was determined that Nb-based MAX phases have good mechanical and thermal properties. In the present systematic density functional theory study we examine the elastic behaviour and radiation tolerance of a range of Nb 2 AC (A = Al, Ga, Ge, In, Sn, As, P, and S) MAX phases. It is found that the Nb-based 211 MAX phases studied here are mechanically stable and elastically anisotropic. Elastically, Nb 2 GeC possesses the highest level of anisotropy and Nb 2 InC, the lowest. The cross-slip pinning process is enhanced in Nb 2 GeC that is considerably reduced in Nb 2 InC. Nb 2 GeC, Nb 2 SnC, and Nb 2 SC are ductile, whereas the other Nb-based MAX phases considered here are brittle in nature. In particular, Nb 2 GeC is highly ductile and Nb 2 AlC is more brittle. Nb 2 PC and Nb 2 SnC are respectively, more stiff and flexible under tension or compression. Nb 2 SnC has the best thermal shock resistance among the Nb-based MAX phase carbides studied here. Regarding the radiation tolerance of these MAX phases it is anticipated that Nb 2 SnC will be the most resistant to radiation.

Related Product:

Nb2SC MAX Phase Powder              

Nb2SnC MAX Phase Powder            

Nb2SnC MAX Phase Powder

Nb4AC3 MXene Powder       

Nb4AlC3 MXene Powder     

Nb4AC3 MXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Ta2AIC MAXene Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Related Product:

Ta2C MXene Powder            

Ta2GaC MAX Phase Powder

Ta4AIC3 MAXene Powder

Ta4C3 MXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Ta2AIC MAXene Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Related Product:

Ta2C MXene Powder            

Ta2GaC MAX Phase Powder

Ta4AIC3 MAXene Powder

Ta4C3 MXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name :  Titanium Alumnium Carbide MAX Phase Powder

Pack Size : 10gram, 50gram ,100gram, 250 gram, 500 gram

Related Product:

Molybdenum Titanium Carbide Mo2TiC2

Titanium Aluminum Carbonitride Ti3AlCN

Titanium Carbonitride Ti3CN

Titanium Vanadium Aluminum Carbide

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days