Markanda Nanoscience (OPC) Private Limited

Mn2AlC is a member of vdW MAX layered material system. Similar to graphite and MoS2, the MAX phases are layered and have the general formula: Mn+1AXn, (MAX) where n = 1 to 3, M is an early transition metal, A is an non-metal elements and X is either carbon and/or nitrogen. In this particular case, M=Mn, A=Al, and X=C with n=1.

World's first electronic and optical grade commercial layered MAXene phase Mn2AlC materials: Mn2AlC MAX phase has been synthesized at our facilities using large reactor chemical vapor deposition to yield World's highest purity (99.999% or higher guaranteed) and layered MAX phases. The MAX phases are electrically and thermally conductive due to their metallic-like nature of bonding. They are excellent for research quality materials as 2D metals, battery applications, supermetallicity, thermal physics , or as precursors for MXene production. Mn2AlC product consists of microsized layered crystals that measure from 1 microns to 100 microns in size (see SEM images below). Each order contains 1000 mg of high purity and layered Mn2AlC MAXenes sealed under inert Ar gas. The product has been perfected in the last years to reach guaranteed 2:1:1 Mn:Al:C ratios and exhibit an extraordinary environmental stability. Each crystallite can be exfoliated either using conventional tape exfoliation or alternatively liquid phase exfoliation technique. 

Additional Information:

• Delivery Time: 6-7 days

Product Name : Magnesium Nanopowder

Our specializes in producing high purity Magnesium Powder with the smallest possible average grain sizes for use in preparation of pressed and bonded sputtering targets and in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Nanoparticles also produce very high surface areas. Our standard powder particle sizes average in the range of - 325 mesh, - 100 mesh, 10-50 microns and submicron (< 1 micron). We can also provide many materials in the nanoscale range. We also produce Magnesium as rod, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.

Cas No:                       7439-95-4      

Appearance                 Gray Powder

APS                             60-70nm (Can be Customized)

Purity                          ≥99%

Chemical formula：  Mg

Molar mass：             24.31

Density：                   1.738 g/cm3

Melting Point :           650 °C

Boiling Point :                        1091 °C

Solubility in H2O:      N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name: Copper Nitride Micro Powder

Pack Size : 10 gram, 50 Gram, 100 Gram, 500 Gram

Pure copper is soft and malleable; an exposed surface has a reddish-orange tarnish. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Main uses: Capacitor materials ,Adopt the inert gas to make bulk copper nano composite material with powder metallurgy; Cu Nanoparticles widelly used as Catalysts; Efficacious catalyst: Copper and copper alloy nanometer, feature high efficacy and selectivity, can be used as catalyst in some reactions, e.g. carbon dioxide compound hydrogen to produce methanol; Cu Nanoparticles used as Conductive coatings; Conductive inks; Conductive slurry: The copper nanopowder can be applied to the productiion of MLCC internal electrode and other electronic components in electronic slurry for the miniaturization of microelectronic devices; The electronic size with good performance made of copper nanopowder instead of valuable metal particles cuts cost to a large extent; This technology is used to the preference of microelectronic processes; Conductive pastes; Cu Nanoparticles are high thermal conductivity materials. Copper Nitride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered.

Cas No:                       1308-80-1      

Appearance                 Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  Cu3N

Molar mass：             204.6

Density：                   5.84 g/cm3

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Hafnium Carbonitride Micro Powder

Hafnium carbonitride (HfCN) is a mixed anion chemical compound of hafnium, carbon and nitrogen. With a melting point of above 4000 °C it is the most refractory compound known. No other substance has a higher melting point at atmospheric pressure. Atomistic simulations predicted that a Hf-C-N material could have a melting point exceeding Ta4Hf1C5 and hafnium carbide by 200 °C. Samples of both hafnium carbide and hafnium carbonitride were tested in the same environment in which hafnium carbonitride was shown to have a melting point exceeding 4000 °C and higher than that of hafnium carbide (3958 °C).More precise testing has yet to be conducted to determine the substance's exact melting point.

Cas No:                       12069-85-1    

Appearance                 powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  HfCN

Molar mass：             204.51

Melting Point：         >3890 °C

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Lutetium Nitride Micropowder

Lutetium Nitride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade. Lutetium is a chemical element with the symbol Lu and atomic number 71. It is a silvery white metal, which resists corrosion in dry air, but not in moist air. The dispute on the priority of the discovery occurred shortly after, with Urbain and Welsbach accusing each other of publishing results influenced by the published research of the other; the naming honor went to Urbain.

Cas No:                       12125-25-6    

Appearance                 Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  LuN

Molar mass：             188.974

Density：                   1.3 g/cm3

Melting Point:            N/A

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Molybdenum Nitride Micropowder

Molybdenum is a chemical element with the symbol Mo and atomic number 42 which is located in period 5 and group 6. Molybdenum does not occur naturally as a free metal on Earth; it is found only in various oxidation states in minerals. The free element, a silvery metal with a grey cast, has the sixth-highest melting point of any element. It readily forms hard, stable carbides in alloys, and for this reason most of the world production of the element (about 80%) is used in steel alloys, including high-strength alloys and superalloys. Molybdenum Nitride (MoN) is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade.

Cas No:                       12033-19-1    

Appearance                 Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  MoN

Molar mass：             109.947

Density：                   9.2 g/cm3

Melting Point:            645.87 °C

Boiling Point              280.74 °C

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Samarium Nitride Powder

Samarium Nitride is a odorless white-colored chemical compound with the formula Sm(NO3)3. It forms the hexahydrate, which decomposes at 50°C to the anhydrous form. When further heated to 420°C, it is converted to the oxynitrate, and at 680°C it decomposes to form samarium oxide.Samarium Nitride nitrate is a lewis acid catalyst that is used to produce a nitrate precursor solution that is used as a nanocatalyst in the solid oxide regenerative fuel cells. The nanocatalyst is made by mixing samarium nitrate hexahydrate, strontium nitrate, and cobalt nitrate hexahydrate Samarium Nitride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade.

Cas No:                       25764-14-1    

Appearance                 Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  SmN

Molar mass：             164.367

Density：                   7.353 g/cm3

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Sodium Nitride Micropowder

Sodium Nitride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade. Sodium nitride is the inorganic compound with the chemical formula Na3N. In contrast to lithium nitride and some other nitrides, sodium nitride is an extremely unstable alkali metal nitride. It can be generated by combining atomic beams of sodium and nitrogen deposited onto a low-temperature sapphire substrate. It readily decomposes into its elements:

Cas No:                       12136-83-3    

Appearance                 White Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  NNa3

Molar mass：             82.97601

Melting Point:            N/A

Density：                   N/A

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Vanadium Nitride Micro Powder

Vanadium nitride, VN, is a chemical compound of vanadium and nitrogen. Vanadium nitride is formed during the nitriding of steel and increases wear resistance. Another phase, V2N, also referred to as vanadium nitride, can be formed along with VN during nitriding. VN has a cubic, rock-salt structure. Vanadium Nitride is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS.

Cas No:                       24646-85-3

Appearance                 Black Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99%

Chemical formula：  NV

Molar mass：             64.9482

Density：                   6.13 g/cm3

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Zinc Nitride Micro powder

Zinc nitride (Zn3N2) is an inorganic compound of zinc and nitrogen, usually obtained as (blue)grey crystals. It is a semiconductor. In pure form, it has the anti-bixbyite structure. Zinc Nitride is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade

Cas No:                       1313-49-1

Appearance                 Powder

APS                             1-5 Micron  (Can be Customized)

Purity                          ≥99%

Chemical formula：  N2Zn3

Molar mass：             224.2

Density：                   6.2 g/cm3

Solubility in H2O:      N/A

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Vanadium Nitride Max Phase Powder

Pack Size : 50 Gram, 100 Gram , 250 Gram, 500 Gram ,

Vanadium Nitride is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No:                       24646-85-3    

Appearance                 Dark gray to Black

APS                             1-5µm (Can be Customized)

Purity                          ≥99.9%

Chemical formula：  VN

Molar Mass：             64.9482

Melting Point:             N/A

Boiling Point:             N/A

Density:                      6.13 g/cm3

Solubility in H2O       N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 days

Product Name : Niobium Nano powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

Niobium, or columbium, is a chemical element with the chemical symbol Nb  and atomic number 41. Niobium is a light grey, crystalline, and ductile transition metal. Pure niobium has a Mohs hardness rating similar to pure titanium, and it has similar ductility to iron. Niobium oxidizes in Earth's atmosphere very slowly, hence its application in jewelry as a hypoallergenic alternative to nickel. Niobium is often found in the minerals pyrochlore and columbite, hence the former name columbium. Its name comes from Greek mythology: Niobe, daughter of Tantalus, the namesake of tantalum. The name reflects the great similarity between the two elements in their physical and chemical properties, which makes them difficult to distinguish.

Related Products:

Niobium Powder / Nb Powder (Nb, 99.9%, 40um, metal basis)

Niobium Nanopowder / Niobium Nanoparticles (Nb, 99.9%, 50nm)

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Titanium Nano Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

Resist ultraviolet radiation and eliminate peculiar smell, such as formaldehyde. in dope industry the powder infilling also play a role in wearable aspects and proof-corrupt; Aerospace materials; Biocompatible materials; Buried ohmic contacts in oxides. Metal-oxide nanocomposites (for improved strength and radiation resistance); Microsensors; Modification of optical properties of glass window materials; Optical filters; Waveguide layers. Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the Titanium Nanoparticles should be avoided under stress.

Related Products:

Titanium Powder / Ti Powder (Ti, 99%, 40um, metal basis)

Titanium Ti Powder, 99% (5, 10, 30, 45, 75um)

Titanium Ti Nanopowder / Nanoparticle (Ti, 99.9%, <70nm, metal basis)

Titanium Ti Nanopowder / Nanoparticle (Ti, 99.9+%, 30-50nm, metal basis)

Ni-Ti Alloy Nanopowder / Nanoparticle, 99.9%, 60 nm, Ni:Ti/50:50

Titanium Nanopowder / Ti Nanoparticles 15wt% Water Dispersion

Titanium Nanoparticles / Ti Nanopowder 15wt% Ethanol Dispersion

Titanium Nanoparticles / Ti Nanopowder 15wt% NMP Dispersion

Ti Nanoparticles / Titanium Nanopowder 15wt% Ethylene Glycol Dispersion

Ti Nanopowder / Titanium Nanoparticles 15wt% Mineral Oil Dispersion

Ti Nanopowder / Titanium Nanoparticles 15wt% Acetone Dispersion

Ti Nanopowder / Titanium Nanoparticles 15wt% Isopropanol Dispersion

Ti Nanopowder / Titanium Nanoparticles 15wt% DMSO Dispersion

Ti Nanoparticles / Titanium Nanopowder 15wt% Propylene Glycol Dispersion

Ti Nanoparticles / Titanium Nanopowder 15wt% Toluene Dispersion

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Boron Nitride Nanoparticles/ Nanopowder

A nanopowder composed of hexagonal particles of boron nitride of approximately 100nm diameter, this material appears as an extremely fine powder. Notable for its hardness, thermal properties, electrical properties, and general versatility, boron nitride nanopowders have been the subject of extensive industrial usage and research. Current and theoretical applications run the gamut from lubricant additive to fuel cell conductor. To learn more about the handling and usage of boron nitride nanoparticles/ nanopowder ( bn ), contact soodchemicals directly.

Cas No:                       10043-11-5    

Appearance                 White Powder

APS                             60-70nm (Can be Customized)

Purity                          ≥99.9%

Chemical formula：  BN

Molar mass：             N/A

Density：                   2.1 g/cm3

Solubility in H2O:      N/A

Boron Nitride (BN) Nanopowder/Nanoparticles Applications

Metalworking and drilling equipment: The hardness and lubricating aspects of boron nitride nanoparticles make them ideal for oil drills and high speed cutting tools of all kinds. It’s also of special value in arc welding and other metallurgy. Due to the demanding material requirements of the field, there are multiple aerospace applications for boron nitride nanoparticles. These include usage in heat shield coatings, rocket engine components, high-temperature lubricants, and a host of others.

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95, Type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 days

Product Name : Ti2AIN MAXene Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Related Product:

Ti2C MXene Powder,            

Ti2Cdc MAX  Phase Powder

 Ti2GaC MAX  Phase Powder          

Ti2GaN MAX  Phase Powder           

Ti2GeC MAX  Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Ti2N MXene Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Related Product:

Ti2NPbC MAX Phase Powder

Ti2SC MAX Phase Powder

Ti2SiC MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Ti2SnC MAX Phase Powder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Related Product:

Ti2SnC MAXene Powder,

Ti2TIC MAX Phase Powder,

Ti2TIC MAX Phase Powder

Ti3AIC2 MAXene  Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Zr2AIC MAX Phase Powder

Pack Size : 10gram, 50gram ,100gram, 250 gram, 500 gram

Related Product:

Zr2PbC MAX Phase Powder

Zr2SC MAX Phase Powder

Zr2SnC MAX Phase Powder

Zr2TIC MAX Phase Powder 

Zr2TIN MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Additional Information:

• Delivery Time: 6-7 days

Product Name : Titanium Carbide Ti2C Max Phase Powder

Pack Size : 50 Gram, 100 Gram , 250 Gram, 500 Gram ,

Titanium Carbide Ti2C is a novel type of 2D material known as a MXene, a compound composed of layered nitrides, carbides, or carbonitrides of transition metals. MXenes are synthesized via exfoliation or etching from a bulk three dimensional precursor MAX phase compoun with the general formula Mn+1AXn, where M is a transition metal, A is an element such as aluminum or silicon, and X is either carbon or nitrogen, with n=1, 2, or 3. Selectively removing the A layer from the MAX phase material results in two dimensional layers of the MXene which can be separated by other ions (known as intercalation). MXenes are notable for their properties that combine aspects of both metals and ceramics including excellent thermal and electrical conductivity, heat resistance, easy machinability, and excellent volumetric capacitance.

Cas No:                       12316-56-2    

Appearance                 Dark gray to black

APS                             1-5µm (Can be Customized)

Purity                          ≥99.9%

Chemical formula：  Ti2C

Molar Mass：            107.74

Melting Point:             N/A

Boiling Point:             N/A

Density:                      4.4 g/cm3

Solubility in H2O       N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 days

Product Name : Strontium Titanate Nanopowder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

Tunable microwave capacitors for communication; Phosphor for field-emission display in flat panel displays; PTC thermistors; Microwave solitons; Varistors; Nonvolatile memory; Electrical insulation; Capacitor dielectric of Gbit-scale DRAMs. Giant piezoelectric effect at cryogenic temperatures; Magnetic field insensitive thermometer; High-voltage capacitors; Ultralow-temperature scanning microscopies; Micro-capacitors; High density dynamic random access memories; Decoupling capacitors; Oxygen sensors; Photocatalyst; Planar capacitors; Semiconductive ceramics; Pyroelectric far-infrared dectors; Soft-phonon devices; Stochastic resonance; Trunable resonant circuits; Varactors.

 Related Products :

Barium Titanate (BaTiO3) Nanopowder / Nanoparticles (BaTiO3, 99.9%, 500 nm, Tetragonal)

Barium Titanate (BaTiO3) Nanopowder / Nanoparticles (BaTiO3, 99.9%, 400 nm, Tetragonal)

Barium Titanate (BaTiO3) Nanopowder / Nanoparticles (BaTiO3, 99.9%, 300 nm, Tetragonal)

Barium Titanate (BaTiO3) Nanopowder / Nanoparticles (BaTiO3, 99.9%, 200 nm, Tetragonal)

Barium Titanate (BaTiO3) Nanopowder / Nanoparticles (BaTiO3, 99.9%, 100 nm, Cubic)

Barium Titanate (BaTiO3) Nanopowder / Nanoparticles (BaTiO3, 99.9%, 50 nm, Cubic)

Barium Titanate (BaTiO3) Nanoparticles / Nanopowder 20wt% Water Dispersion

Barium Titanate (BaTiO3) Nanoparticles / Nanopowder 20wt% Ethanol Dispersion

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

Predominantly single phase (92–94 vol.%), fully dense samples of Hf2SnC, Zr2SnC, Nb2SnC, Ti2SnC, Hf2PbC and Zr2PbC were fabricated by reactively HIPing the stoichiometric mixture of the corresponding elemental powders in the 1200–1325°C temperature range for 4–48 h. The latter two, fabricated here for the first time, required a further anneal of 48–96 h to increase the volume fraction of ternary phases. Hf2PbC and Zr2PbC are unstable in ambient atmospheres at room temperature. As a family these compounds are good electrical conductors; the lowest and highest values of the electrical conductivities were, respectively, 2.2×106 (Ω.m)−1 for Hf2SnC and 13.4×106 (Ω.m)−1 for Hf2PbC. The Vickers hardness values range from 3 to 4 GPa. All compounds are readily machinable. The Young's moduli of Zr2SnC, Nb2SnC and Hf2SnC are, respectively, 178, 216 and 237 GPa. The thermal coefficients of expansion, TCE's, of the ternaries scale with those of the corresponding binaries, and are relatively low for such readily machinable solids. The lowest TCE belonged to Nb2SnC [(7.8±0.2)×10−6 K−1], and the highest to Ti2SnC [(10±0.2)×10−6 K−1]. The TCE's of Hf and Zr containing ternaries cluster around (8.2±0.2)×10−6 K−1. All the synthesized ternary carbides were found to dissociate into the transition metal carbide

Related Product:

Hf2SC MAX Phase Powder 

Hf2SnC MAX Phase Powder           

Hf2SnN MAX Phase Powder

Hf2TIC MAX Phase Powder

Mn2AIC MAXene Powde

Product Name :  Aluminum Nitride Micro powder

Cas No:                       24304-00-5

Appearance                 White Powder

APS                             1-5µm

Purity                          ≥99%

Chemical Formula       AlN

Molar Mass                 40.9882

Density                        2.9 to 3.3 g/cm3

Soluble In H2O           N/A

Description :-

Aluminum Nitride is generally immediately available in most volumes. Offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered.Typical and custom packaging is available, as is additional research, technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 4-5 days

Product Name : Aluminium Nitride Nanopowder

Cas No:                       24304-00-5     

Appearance                 White powder

APS                             100 nm (Can be Customized)

Purity                          ≥99.9%

Formula:                      AlN

Melting point: 2,200 °C

Density:           3.26 g/cm³

Boiling point: 2,517 °C

Molar mass: 40.9882 g/mol

Usage/Application      : Scientific Research

Related Information :

AlN is synthesized by the carbothermal reduction of aluminium oxide in the presence of gaseous nitrogen or ammonia or by direct nitridation of aluminium. The use of sintering aids, such as Y2O3 or CaO, and hot pressing is required to produce a dense technical-grade material. Epitaxially grown thin film crystalline aluminium nitride is used for surface acoustic wave sensors (SAWs) deposited on silicon wafers because of AlN's piezoelectric properties. One application is an RF filter, widely used in mobile phones,which is called a thin-film bulk acoustic resonator (FBAR). This is a MEMS device that uses aluminium nitride sandwiched between two metal layers. AlN is also used to build piezoelectric micromachined ultrasound transducers, which emit and receive ultrasound and which can be used for in-air rangefinding over distances of up to a meter. Metallization methods are available to allow AlN to be used in electronics applications similar to those of alumina and beryllium oxide. AlN nanotubes as inorganic quasi-one-dimensional nanotubes, which are isoelectronic with carbon nanotubes, have been suggested as chemical sensors for toxic gases. Currently there is much research into developing light-emitting diodes to operate in the ultraviolet using gallium nitride based semiconductors and, using the alloy aluminium gallium nitride,

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

We provide Products / Services Only for Research not for Human Consumption.

Additional Information:

• Delivery Time: 6-7 days

We report on first principles prediction and subsequent synthesis of Mn2GaC, a new member of the inherently nanolaminated Mn+1AXn (MAX) phase family. This phase, the first to include Mn as the sole M element, was synthesized as a heteroepitaxial thin film. The material was theoretically predicted to display magnetic ordering with ferromagnetic (FM) and antiferromagnetic configurations degenerate in energy within the computational accuracy. Vibrating sample magnetometer measurements show FM ordering with a saturation moment of ms=0.29 μB per Mn atom and remanent moment of mr=0.15 μB per Mn atom for temperatures≤230 K.

Related Product:

Mn3AlC2 MAXene Powder 

Mo2C MXene Powder          

Mo2Ga2C MAXene Powder

Mo2GaC MAX Phase Powder          

Mo2Ti2AIC3 MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Molybdenum Titanium Carbide Mo2TiC2 Max Phase Powder

Pack Size : 50 Gram, 100 Gram , 250 Gram, 500 Gram ,

Molybdenum Titanium Carbide Mo2TiC2 is a novel type of 2D material known as a MXene, a compound composed of layered nitrides, carbides, or carbonitrides of transition metals. MXenes are synthesized via exfoliation or etching from a bulk three dimensional precursor MAX phase compoun with the general formula Mn+1AXn, where M is a transition metal, A is an element such as aluminum or silicon, and X is either carbon or nitrogen, with n=1, 2, or 3. Selectively removing the A layer from the MAX phase material results in two dimensional layers of the MXene which can be separated by other ions (known as intercalation). MXenes are notable for their properties that combine aspects of both metals and ceramics including excellent thermal and electrical conductivity, heat resistance, easy machinability, and excellent volumetric capacitance.

 Cas No:                       N/A    

Appearance                 Dark gray to black

APS                             1-5µm (Can be Customized)

Purity                          ≥99.9%

Chemical formula Mo2TiC2

Molar Mass 263.77

Melting Point:             N/A

Boiling Point:              N/A

Density:                       N/A

Solubility in H2O:       N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name :  Fullerene-C60

Fullerene  Molecular Weight               720.64

Fullerene  Size             Diameter: 0.8 nm, Length: 1.2 nm

Fullerene  Purity          99.9%

Fullerene  Melting Point         >280 °C

Fullerene  True Density           1.71 g/cm3

Fullerene  Electrical Resistivity          1034 ohms m-1

Fullerene  Appearance Shinning Black

Fullerene  CAS           99685-96-8

Application :-

Pharmaceutical: Diagnostic reagents, super drugs, cosmetics, nuclear magnetic resonance (NMR) with the developer. DNA affinity. Energy: Solar battery, fuel cell, secondary battery. Industry: Wear resistant material, flame retardant materials, lubricants, polymer additives, high-performance membrane, catalyst. Artificial diamond, hard alloy, electric viscous fluid, ink filters, high-performance coatings, fire retardant coatings, manufacturing bioactive materials , memory materials, embedded molecular and other characteristics, composite materials etc. Information industry: Semiconductor record medium, magnetic materials, printing ink, toner, ink, paper special purposes. Electronic parts: Superconducting semiconductor, diodes, transistors, inductor. Optical materials, electronic camera, fluorescence display tube, nonlinear optical materials.Environment: Gas adsorption, gas storage.

 Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 5-6 days

Product Name :  Fullerene-C60

Fullerene  Molecular Weight               720.64

Fullerene  Size             Diameter: 0.8 nm, Length: 1.2 nm

Fullerene  Purity          99.9%

Fullerene  Melting Point         >280 °C

Fullerene  True Density           1.71 g/cm3

Fullerene  Electrical Resistivity          1034 ohms m-1

Fullerene  Appearance Shinning Black

Fullerene  CAS           99685-96-8

Application :-

Pharmaceutical: Diagnostic reagents, super drugs, cosmetics, nuclear magnetic resonance (NMR) with the developer. DNA affinity. Energy: Solar battery, fuel cell, secondary battery. Industry: Wear resistant material, flame retardant materials, lubricants, polymer additives, high-performance membrane, catalyst. Artificial diamond, hard alloy, electric viscous fluid, ink filters, high-performance coatings, fire retardant coatings, manufacturing bioactive materials , memory materials, embedded molecular and other characteristics, composite materials etc. Information industry: Semiconductor record medium, magnetic materials, printing ink, toner, ink, paper special purposes. Electronic parts: Superconducting semiconductor, diodes, transistors, inductor. Optical materials, electronic camera, fluorescence display tube, nonlinear optical materials.Environment: Gas adsorption, gas storage.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 5-6 days

Product Name : Terbium Nanopowder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

Terbium is a chemical element with the symbol Tb and atomic number 65. It is a silvery-white, rare earth metal that is malleable, and ductile. The ninth member of the lanthanide series, terbium is a fairly electropositive metal that reacts with water, evolving hydrogen gas. Terbium is never found in nature as a free element, but it is contained in many minerals, including cerite, gadolinite, monazite, xenotime and euxenite.

Terbium is used to dope calcium fluoride, calcium tungstate and strontium molybdate in solid-state devices, and as a crystal stabilizer of fuel cells that operate at elevated temperatures. As a component of Terfenol-D (an alloy that expands and contracts when exposed to magnetic fields more than any other alloy), terbium is of use in actuators, in naval sonar systems and in sensors.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Hafnium Carbonitride Max Phase Powder

Pack Size : 50 Gram, 100 Gram , 250 Gram, 500 Gram ,

Hafnium Carbonitride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade.Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement. MXene from the bulk three dimensional MAX phase compound involves exfoliation or etching to selectively remove the A layer, resulting in layers which can be separated by other ions (known as intercalation) which enhances their properties. Please request a quote above to receive pricing information based on your specifications.

Cas No:                       N/A    

Appearance                 Gray Powder

APS                             1-5µm (Can be Customized)

Purity                          ≥99.9%

Chemical formula HfCN

Molar Mass 204.51

Melting Point:             >3890 °C

Boiling Point:              N/A

Density:                       N/A

Solubility in H2O:       N/A

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Selenium Nanopowder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

Selenium is a chemical element with the symbol Se and atomic number 34. It is a nonmetal (more rarely considered a metalloid) with properties that are intermediate between the elements above and below in the periodic table, sulfur and tellurium, and also has similarities to arsenic. Selenium is found in metal sulfide ores, where it partially replaces the sulfur. Commercially, selenium is produced as a byproduct in the refining of these ores, most often during production. Minerals that are pure selenide or selenate compounds are known but rare. The chief commercial uses for selenium today are glassmaking and pigments. Selenium is a semiconductor and is used in photocells. Applications in electronics, once important, have been mostly replaced with silicon semiconductor devices. Selenium is still used in a few types of DC power surge protectors and one type of fluorescent quantum dot. Although trace amounts of selenium are necessary for cellular function in many animals, including humans, both elemental selenium and (especially) selenium salts are toxic in even small doses, causing selenosis.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Cobalt Nanoparticle

Cobalt nanoparticle has a number of advantages and selling points. Firstly, due to its small particle size, it has a much larger surface area than regular cobalt powder, making it highly reactive. This reactivity gives it excellent applications in fields such as catalysis and energy storage. Secondly, the high purity and homogeneity of the powder makes it ideal for use in electronic and magnetic materials. Additionally, the unique properties of Cobalt nanoparticle make it perfect for use in producing high-temperature superconductors, as well as in the fabrication of magnetic resonance imaging (MRI) contrast agents. Overall, Cobalt nanoparticle has excellent potential for use in a wide range of advanced technologies and applications.

Cas No:                       7440-48-4      

Appearance                 Gray Powder

APS                             100 nm  (Can be Customized)

Purity                          ≥99.9%

Chemical formula：  Co

Moleculer weight :     58.93

Melting point: 1,495 °C

Density: 8.9 g.cm-3 at 20°C

Usage/Application      : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Storage Conditions:

Airtight sealed, Avoid light and keep dry at Room Temperature.

Wear Appropriate Protective Gloves & Clothing to Prevent Skin Exposure.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Cobalt Nanopowder

Pack Size:  10 gram, 50gram, 100gam ,250gram, 500 gram

Description :-

Electromagnetic-wave absorption; Electromagnetic-wave radiation shielding for cellar phones; Ferrofluids; High density magnetic storage; Magnetic inks; Magnetic toner in xerograph; Contrast agents in magnetic resonance imaging. Metal nanopowder should be gently placed  and avoided violent vibration and friction. Metal nanopowder should be prevented from moisture, heat, impact and sunlight.

Related Products:

Co Cobalt (Co) Powder, 99.95% (1, 7, 8, 10, 15um)

Co Cobalt, 99.9%, 1-3um

Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, partially passivated, metal basis)

Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, carbon coated, metal basis)

Fe-Ni-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni:Co/55:28:17

Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11

Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%, <100nm

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer’s requirements and also accept customization in various parameterts.

Additional Information:

• Delivery Time: 6-7 days

• CAS Number: 12070-10-9
• Appearance: Black Powder
• Particle Size: 40-45μm
• Purity: >99 wt.%

Applications

Vanadium Aluminum Carbide (V4AlC3) belongs to the family of Mn+1AXn (MAX) phases with more than 80 members. These are layered, machinable, nanolaminated ternary carbides, nitrides and borides, where M is an early transition metal, A is an A-group element, mainly from groups 13–16 and X is C or N or B. These compounds possess hexagonal crystal structure with space group P63/mmc (space group number: 194), where M atoms are in a near closed packed arrangement and are intercalated with A-group atomic layers, with the X-atoms residing in the octahedral sites between the M layers. These atomic arrangements give the MAX phases an effective laminated layered structure that leads to the naming of the MAX phase as nanolaminates. MAX phases possess a unique combination of properties, both metallic and ceramic in nature due to the layered structure. Metallic properties can include good thermal and electrical conductivities, good thermal shock resistance, excellent damage tolerance, and good machinability. Ceramic properties include low density, elastic rigidity, oxidation and creep resistance, and the ability to maintain the strength up to very high temperatures.

V4AlC3 is an emerging vanadium-based MAX material that possesses a thicker V4C3 component and higher corrosion resistance than that of the V2AlC MAX material. It is a precursor of V2O5/C composite, which is a potential cathode material for Zn-ion batteries (AZIBs). It is also an efficient heterogeneous catalyst for solvent-free aerobic oxidation of toluene to benzaldehyde.

Product Name : Praseodymium Nanoparticles Nanopowder

Product Description

Praseodymium (Pr) Nanoparticles, nanodots or nanopowder are black spherical high surface area particles. Nanoscale Praseodymium Particles are typically 10 - 45 nanometers (nm) with specific surface area (SSA) in the 30 - 50 m2/g range. Nano Praseodymium Particles are also available in passivated and Ultra high purity and high purity and coated and dispersed forms. Nanofluids are generally defined as suspended nanoparticles in solution either using surfactant or surface charge technology. Nanofluid dispersion and coating selection technical guidance is also available. Other nanostructures include nanorods, nanowhiskers, nanohorns, nanopyramids and other nanocomposites. Surface functionalized nanoparticles allow for the particles to be preferentially adsorbed at the surface interface using chemically bound polymers.

Additional Information:

• Delivery Time: 6-7 days

Product Name : Europium Oxide Nanoparticles / Nanopowder

A fine white powder composed of europium oxide particles with diameters of approximately 50nm, this material is well-known for its unique optical properties, which make it ideal for various forms of lighting and display. If you’d like to learn more about ordering, handling, and utilizing europium oxide nanopowder / nanoparticles (eu2o3 nanopowder/nanoparticles), you can contact soodchemicals directly.

Cas No:                       1308-96-9      

Appearance                 White Powder

APS                             60-70nm (Can be Customized)

Purity                          ≥99%

Chemical formula：  Eu2O3

Molar mass：             351.926 g/mol

Density：                   7.4 g/cm³

Melting Point:            2,350 °C

Boiling Point:                         3,790 °C

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Additional Information:

• Delivery Time: 6-7 days